[. . . ] Keep all nuts, bolts and screws tight to be sure that the lawnmower is in safe working condition. Be careful during adjustment of the machine to prevent entrapment of the fingers between moving blades and fixed parts of the machine. [. . . ] Cylinder Mower Part number Blade width No of Cylinder Blades Height of cut Weight AHM 30 0 600 886 001 30 cm 4 12 ­ 40 mm 5. Carefully remove the machine from its packaging and check that you have all the following items: ­ Lawnmower ­ Bottom handle ­ Top handle ­ 2 Handle Centres ­ 6 Nuts ­ 6 Bolts ­ Operating instructions When parts are missing or damaged, please contact your dealer. This manual gives instructions on the correct assembly and safe use of your machine. Take care when carrying the mower to the lawn, as the blades are sharp. B Assemble the top handle 2 to the handle centres 3, and fit to handle bottom 1. Regularly check for obvious defects such as loose, dislodged or damaged blades, loose fixings, and worn or damaged components. If the mower should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorised customer service agent for Bosch garden products. For all correspondence and spare parts orders, always include the 10-digit part number from the nameplate of the machine!Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee. In case of complaint please send the machine, undismantled, to your dealer or the Bosch Service Centre for lawn and garden products. [. . . ] Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee. In case of complaint please send the machine, undismantled, to your dealer or the Bosch Service Centre for lawn and garden products. [. . . ]